|
|
Post by GhostFist on Sept 24, 2013 13:17:25 GMT -5
Ya a full set up would be nice!
|
|
|
|
Post by wrightwoodwork on Oct 8, 2013 7:26:09 GMT -5
I've done a vid showing the erika being set up in the basic mode and I have also done 1 of changing the blade will post when get downloaded
|
|
|
|
Post by GhostFist on Oct 8, 2013 9:31:37 GMT -5
Great to see how easy it levels with that foot pedal. What were you checking whew starting the blade forward?
|
|
|
|
Post by wrightwoodwork on Oct 8, 2013 10:31:52 GMT -5
I would be checking that the fence is perfectly square with the blade this is done by setting the fence parallel with the saw blade so a simple pull at the start of when setting up just to confirm any settings don't need adjusting
|
|
|
|
Post by wrightwoodwork on Oct 11, 2013 17:44:14 GMT -5
Finally got the vid of the saw blade being changed downloaded
|
|
|
|
Post by GhostFist on Oct 11, 2013 19:39:57 GMT -5
Hey thanks for this! I had no Idea blade changes were done from underneath the saw. I know you're trying to film the process here but do you find it difficult to get your arms in to hit the spindle lock button and loosen the arbor nut? Or is there enough room in there to do your business? I like that there is a spindle lock!
|
|
|
|
Post by stofke72 on Oct 11, 2013 20:52:40 GMT -5
|
|
|
|
Post by wrightwoodwork on Oct 12, 2013 3:51:59 GMT -5
Hey thanks for this! I had no Idea blade changes were done from underneath the saw. I know you're trying to film the process here but do you find it difficult to get your arms in to hit the spindle lock button and loosen the arbor nut? Or is there enough room in there to do your business? I like that there is a spindle lock! no as long as you lock the saw so it rests in the middle then it is not too bad. The spindle lock is just simply a button that that you push and when you turn the spindle finds a hole to go into. So you have to keep it pushed. I know on the festool saw it is done from above, the reason I got told mafell didn't go down that route was for accuracy as dust can get below the table causing it go off |
|
|
|
Post by jalvis on Oct 12, 2013 10:34:55 GMT -5
Thats a new one. Had no idea thats how the blade was removed. Doesn't look difficult but it seems like a table insert would make more sense. Then you could have a zero clearance insert but I'm sure Mafell has there reasons.
|
|
|
|
Post by wrightwoodwork on Jan 12, 2014 6:22:08 GMT -5
Here's a vid of making a housing joint and using 2 fences one as a stop and the second fence to place the wood against. I should have done the housing before the rebate was taking out
|
|
|
|
Post by wrightwoodwork on Jan 12, 2014 20:05:44 GMT -5
Here is a video I have done showing the controls of the Erika 70 and the universal fence
|
|
questa
Junior Member
Posts: 62 
|
Post by questa on Feb 15, 2014 18:25:05 GMT -5
|
|
|
|
Post by wrightwoodwork on Mar 2, 2014 14:28:57 GMT -5
A little video I have done using 1m guide fence extension and the drop stop to achieve repetitive cuts I'm also planning at sometime to build up the guide stop system properly add an extra 1m rail and the extending guide rail
|
|
|
|
Post by GhostFist on Mar 2, 2014 15:24:36 GMT -5
You're da man Aaron!
|
|
|
|
Post by garch on Apr 24, 2014 21:35:55 GMT -5
Heiko Rech posted a couple of Erika videos.
|
|
