|
Post by aas on Aug 28, 2020 0:28:13 GMT -5
Mafell do a 1,8mm triple chip blade for the MT55, it's a very nice blade.
|
|
iban
Full Member
 
Posts: 111
|
Post by iban on Aug 28, 2020 2:23:34 GMT -5
Well absolutely done! Bargain! Now, you mentioned, they have few more Mafell tools, but the site isn't listing none... Could you get exact model numbers and prices please? Still waiting for this guy's answer... sorry if I can not get thebprices for you Not sure if he is very interested in selling those few things under his profit margin unless one goes there an pick them up physically (asked me to pay cash...) By the way he said he had some of them in Ebay and searching I found this www.ebay.es/itm/362791013847Don't know if it's a good price bit it is one of what he had in the warehouse
|
|
|
Post by alvychippy on Aug 28, 2020 12:22:54 GMT -5
on the top (the actual knob side (hard to get to)) there's black torx screw inside black plastic knob Really? How couldn´t I see it? you don´t have a photo of that. Do you?? You are correct, (didn't get to double check), but the knob is perhaps pressed on the skewed holder, that pushes on a slider block... If anything don't used wd40 gunking oil, try simple grease?... And last resort... Warranty is there 😉
|
|
|
Post by alvychippy on Aug 28, 2020 12:31:57 GMT -5
Well absolutely done! Bargain! Now, you mentioned, they have few more Mafell tools, but the site isn't listing none... Could you get exact model numbers and prices please? Still waiting for this guy's answer... sorry if I can not get thebprices for you Not sure if he is very interested in selling those few things under his profit margin unless one goes there an pick them up physically (asked me to pay cash...) By the way he said he had some of them in Ebay and searching I found this www.ebay.es/itm/362791013847Don't know if it's a good price bit it is one of what he had in the warehouse Well that one isn't made in 110v, so not much use, but price is bit of a steal! I'm certain he's loosing money on it. They are here prices more or less the same as Erika85 very close to £3k
|
|
|
Post by alvychippy on Aug 28, 2020 12:42:42 GMT -5
Mafell do a 1,8mm triple chip blade for the MT55, it's a very nice blade. Try flat teeth configured blade (not ATF) and not Triple Chip ( iban posted Bosch and Freud "for aluminium") you'll be in for a nice surprise, especially your wallet 
|
|
|
Post by aas on Aug 28, 2020 13:27:25 GMT -5
I use aluminium blades in two of my mitre saws, not thought about it for the MT.
|
|
iban
Full Member
 
Posts: 111
|
Post by iban on Aug 28, 2020 15:42:57 GMT -5
Still waiting for this guy's answer... sorry if I can not get thebprices for you Not sure if he is very interested in selling those few things under his profit margin unless one goes there an pick them up physically (asked me to pay cash...) By the way he said he had some of them in Ebay and searching I found this www.ebay.es/itm/362791013847Don't know if it's a good price bit it is one of what he had in the warehouse Well that one isn't made in 110v, so not much use, but price is bit of a steal! I'm certain he's loosing money on it. They are here prices more or less the same as Erika85 very close to £3k yes, everything is 220v here. I thought you had the same in UK
|
|
|
Post by alvychippy on Aug 28, 2020 17:01:03 GMT -5
[quote author=" iban" source="/post/23943/thread" timestamp=[/quote]yes, everything is 220v here. I thought you had the same in UK[/quote] I'd wish... In a workshop yes, but not extension leads On site no, and no... Either 110v or (qay) cordless...😖
|
|
|
Post by alvychippy on Aug 29, 2020 2:33:23 GMT -5
Watch out for your safety iban , if old @ass going to find LO50 in that stock- he'll find you, he'll find the seller and... as an panther- one bite on a neck!
|
|
iban
Full Member
 
Posts: 111
|
Post by iban on Aug 29, 2020 8:24:53 GMT -5
[quote author=" iban" source="/post/23943/thread" timestamp= yes, everything is 220v here. I thought you had the same in UK[/quote] I'd wish... In a workshop yes, but not extension leads On site no, and no... Either 110v or (qay) cordless...😖[/quote] Whats the benefit of having 2 voltages? ?🤔 He is welcome to come but better to bring cash for the guy instead of sharp teeth 🤣 Knobs are better now. I can turn them by hand
|
|
|
Post by aas on Aug 29, 2020 9:25:26 GMT -5
Watch out for your safety iban , if old @ass going to find LO50 in that stock- he'll find you, he'll find the seller and... as an panther- one bite on a neck! How a letter can change everything... 'aas' not 'ass' - neither a donkey nor an a-hole!.. but if he's got a LO50E up for grabs, I'll accept either until it is mine!
|
|
|
Post by alvychippy on Aug 29, 2020 12:31:54 GMT -5
[quote author=" iban" source="/post/23943/thread" timestamp= yes, everything is 220v here. I thought you had the same in UK I'd wish... In a workshop yes, but not extension leads On site no, and no... Either 110v or (qay) cordless...😖[/quote] Whats the benefit of having 2 voltages? ?🤔 He is welcome to come but better to bring cash for the guy instead of sharp teeth 🤣 Knobs are better now. I can turn them by hand[/quote] 110 is way safer for knocking one out, on site, IE cable damaged, wet etc - you'll feel 110 as well, but that'll be not lethal lesson Beware of him, as it comes to tools, I don't trust him. Nice to hear, if that's OK, all you got left is 1 - get cheap suitable clamps, 2 either hoover (extractor) adapter or... Find an "evolution" dust bag (£9), but don't pay ransom for a genuine- they aren't great.
|
|
|
Post by alvychippy on Aug 29, 2020 12:35:25 GMT -5
Watch out for your safety iban , if old @ass going to find LO50 in that stock- he'll find you, he'll find the seller and... as an panther- one bite on a neck! How a letter can change everything... 'aas' not 'ass' - neither a donkey nor an a-hole!.. but if he's got a LO50E up for grabs, I'll accept either until it is mine!
TBH, one evening, I have almost come to a sort of epitomy But then... Every man for himself 
|
|
|
Post by mafellme on Aug 29, 2020 12:51:41 GMT -5
Epiphany?
|
|
|
Post by alvychippy on Aug 29, 2020 12:53:34 GMT -5
Yes But no, somehow, I'm not a nice touchy feely person, nope! None of that
|
|