What's best dust bag for MT55CC,when vacuum not available?

new

kraftt
God

MT55 - Measure once, Cut twice.

Posts: 1,152

What's best dust bag for MT55CC,when vacuum not available? Nov 21, 2019 10:49:54 GMT -5 reflector likes this

Quote

Post by kraftt on Nov 21, 2019 10:49:54 GMT -5

tablefulfads wrote:

"I am not so aware of the dust bags.... "

Use mine all the time, very satisfied with it. One hand push on/ pull off, ez to empty without shaking, can leave connected to saw while emptying over trash, large internal capacity, cleans up fast & thorough. Fits inside systainer with saw allowing me to store other items inside it.

Last Edit: Nov 21, 2019 10:58:48 GMT -5 by kraftt

peterricho
New Member

Posts: 1

What's best dust bag for MT55CC,when vacuum not available? Dec 11, 2020 6:50:42 GMT -5 via mobile

Quote

Post by peterricho on Dec 11, 2020 6:50:42 GMT -5

I just bought the Mafell dust bag and yes, it doesn't stay connected to the MT55 very well - but it does have a groove on the connecting sleeve that looks like it's for an o-ring. No ring came with the bagbut has anyone tried fitting one? Seems like that would make it fit much more securely.

Last Edit: Dec 11, 2020 6:53:27 GMT -5 by peterricho

aas God Posts: 1,545	What's best dust bag for MT55CC,when vacuum not available? Dec 11, 2020 12:03:19 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by aas on Dec 11, 2020 12:03:19 GMT -5 I've got three, they all fit and stay connected. Not sure if there's an O-ring or not, I'll try to remember to check for you.
	Erika 85EC with Incra LS positioner - A12 - A18M - DD40P - DDF40 - EVA150E/5 - HIT-M 65 - K65 18M BL (with KSS60 base) - KF1000 - KSS40 - KSS80EC - LO65EC (with Albin Kraus base) - MF26CC/400 - MT55CC - MT55 18M BL - NFU50 - P1CC - Aerofix - & lots of Mafell accessories! ( Sold : A10M )

Knight Woodworks Senior Member Posts: 390	What's best dust bag for MT55CC,when vacuum not available? Dec 16, 2020 16:18:51 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Knight Woodworks on Dec 16, 2020 16:18:51 GMT -5 The bag for my MT55 does have an o-ring. Fits fine and stays attached. Unfortunately the catch broke the first time I used it... John

aas God Posts: 1,545	What's best dust bag for MT55CC,when vacuum not available? Dec 17, 2020 15:07:29 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by aas on Dec 17, 2020 15:07:29 GMT -5 I've checked, I've got O-rings.
	Erika 85EC with Incra LS positioner - A12 - A18M - DD40P - DDF40 - EVA150E/5 - HIT-M 65 - K65 18M BL (with KSS60 base) - KF1000 - KSS40 - KSS80EC - LO65EC (with Albin Kraus base) - MF26CC/400 - MT55CC - MT55 18M BL - NFU50 - P1CC - Aerofix - & lots of Mafell accessories! ( Sold : A10M )

Shoutbox

MUF!

robertbell: you asked a good question there are many tool belts in the market but my favourite this tool belt reviewsive.com/plumber-tool-belts/ Nov 17, 2020 15:40:45 GMT -5

abdon: I stand corrected , the angle fence is only attaches with F -Tracks , what confused me was , that the Timberwolf site mentioned it will work with the NFU machine, yes it will work but only I guess when you use the Ftrack , with other tracks Like the KSS L. Nov 28, 2020 22:52:01 GMT -5

glynnco: Did you order from GereedschapPro? I see them as in stock but I'm located in the US and am not sure if they ship here. I sent them an email asking about shipping but it was returned undeliverable... Dec 10, 2020 7:37:40 GMT -5

jonathan: I've purchased a lot of stuff from our neighbours @ GereedschapPro.nl As far as I know they are one of the larger Mafell dealers in the EU. I can recommend them, they usually respond quickly. Dec 11, 2020 13:58:36 GMT -5 *

NFU 50 Transportation?: Hi Guys, is there some Systainer for the NFU 50? Dec 11, 2020 14:30:12 GMT -5

frezik24: Hello everyone Dec 13, 2020 9:20:00 GMT -5

lasse: Thanks for the tip! I have own a mafell rail which is 160 cm and one that is 80 cm. Will it work just as well or will I need to buy rail that is 110 cm? Mar 18, 2021 15:35:15 GMT -5

span: keep safe everyone!!!! Mabuhay!!! Mar 23, 2021 21:20:28 GMT -5

guest: I can't still not log in - get this message "PENDING STAFF APPROVAL" Apr 26, 2021 11:36:38 GMT -5

sbh: How do you register. It says pending staff approval. Jul 6, 2021 16:57:14 GMT -5

beaver: are you referring to me here? I'm tagged but don't know why! Oct 23, 2021 16:26:26 GMT -5

Wolverine85: How long does it take to get staff approval to join this August body of Mafell users? Dec 2, 2021 13:17:00 GMT -5

GhostFist: Takes a bloody long time Dec 21, 2021 18:53:11 GMT -5

boaz: Thanks for the information here is the detailed information you need to know about my lowes life Jan 10, 2022 6:45:40 GMT -5

oslekflooring: Oslek Flooring- Environment-Friendly Engineered Timber Flooring Solutions in Melbourne & Sydney Feb 13, 2022 22:15:42 GMT -5

the man from 3rd world: man.. you are all lucky, i cant purchase duo doweller here in the Philippines T_T Feb 20, 2022 13:37:51 GMT -5

woodbeautician: Can you still buy the cantex ergo? Its not listed on Lincoln Sentries website which is the Australian distributor for Lamello. Apr 7, 2022 3:26:15 GMT -5

lincoln: woodbeautician - I think it has been discontinued. I have a Virutex, that I got from Northern Abrasives in Sydney. Apr 19, 2022 22:42:49 GMT -5

delorenzo: Hello, gents, I got the same question, can someone answer this? Apr 26, 2022 11:26:19 GMT -5

Etha Armstrong: This home is a beautiful blend of traditional and modern design elements, creating a truly stunning space. beautiful home decor
Feb 16, 2023 7:26:49 GMT -5

What's best dust bag for MT55CC,when vacuum not available?

Post by kraftt on Nov 21, 2019 10:49:54 GMT -5

Post by peterricho on Dec 11, 2020 6:50:42 GMT -5

Post by aas on Dec 11, 2020 12:03:19 GMT -5

Post by Knight Woodworks on Dec 16, 2020 16:18:51 GMT -5

Post by aas on Dec 17, 2020 15:07:29 GMT -5

Shoutbox