|
Post by wiz1258 on Nov 6, 2014 21:42:14 GMT -5
My first Mafell tool is the MS 55 with 110 and 160 tracks and a miter guide.
I've been spending way too much time drooling over all the other tools.
My plan is to purchase a KSS 300 next. Then a P1cc.
Not sure after that. 4 other items, the sander, the DD40P, kss 400, kss80Ec
|
|
|
Post by 7 on Nov 6, 2014 22:58:32 GMT -5
My order:
MT55 and KSS300 with the following tracks: F80, F110, F160, F310 & connector (later bought the bosch deal- 2 160 rails, connector & bag @ toolstop). I was just going to order the MT55 first so the 300 can be called the second purchase & I would've also been happy with that order.
P1CC next
KSS400 then the long KSS track.
I like your profile picture wiz1258, it's a good one.
|
|
|
Post by GhostFist on Nov 7, 2014 12:30:15 GMT -5
Kss 300, mt55, p1cc, dd40
|
|
|
Post by jonathan on Nov 7, 2014 13:31:16 GMT -5
mt55, p1cc, dd40
|
|
|
Post by jimbouk on Nov 7, 2014 17:12:58 GMT -5
Mt55 and dd40 first. Next is the p1cc for me. Also after another saw for framing work so I dont need a chopsaw all the time.
|
|
|
Post by MrToolJunkie on Nov 7, 2014 18:42:47 GMT -5
Well, I got the P1CC first and just today placed the order for the KSS80.
|
|
|
Post by wrightwoodwork on Nov 7, 2014 19:10:10 GMT -5
Kss400, ksp85, DD40p, P1cc, Erika70ec, Kss400/36v, LO65ec. Next properly the kss80 it won't me till next year and maybe the mt55cc if cutting more laminate material
|
|
|
Post by MrToolJunkie on Nov 8, 2014 1:06:03 GMT -5
Aaron - you probably have one of the best collections of Mafell along with Garch and R Cash. That is an impressive list for sure.
|
|
|
Post by jimbouk on Nov 8, 2014 2:58:57 GMT -5
Kss400, ksp85, DD40p, P1cc, Erika70ec, Kss400/36v, LO65ec. Next properly the kss80 it won't me till next year and maybe the mt55cc if cutting more laminate material Havent you got an extractor as well mate? Thought i seen it in your vids...i want an erika!
|
|
|
Post by wrightwoodwork on Nov 8, 2014 4:13:26 GMT -5
Yeah I do forgot to list it. I got the extractor same time as I got the kss400. Actually I've being looking at those little dewalt cordless extractors and the milwauke extractors to use with the cordless kss400/36. Has anyone used them and what do they think. It would be handy.
|
|
questa
Junior Member
![*](//storage.proboards.com/forum/images/stars/star.png)
Posts: 62
|
Post by questa on Nov 8, 2014 9:04:24 GMT -5
I only have the Erika 70ec. Right now while I like the looks of the KSS's I dont really have a need as the Erica meets most of my needs. My Kapex has been gathering dust.
|
|
|
Post by wrightwoodwork on Nov 8, 2014 13:50:17 GMT -5
Aaron - you probably have one of the best collections of Mafell along with Garch and R Cash. That is an impressive list for sure. Yeah I do have few tools all are used some more than others. Next I think is the kss80 I think at work I have more tools than anybody. My old boss phoned asking for a loan of my reciprocating saw.
|
|
|
Post by MrToolJunkie on Nov 8, 2014 16:02:59 GMT -5
It is good to have the right tool for the job...too often I see guys struggling to make do and spending more time messing around than just having the right tool. Time saved and less rework are key. Build into that the longevity of high quality tools like Mafell and you end up saving money in the long run.
|
|
|
Post by 7 on Nov 8, 2014 22:44:22 GMT -5
I only have the Erika 70ec. Right now while I like the looks of the KSS's I dont really have a need as the Erica meets most of my needs. My Kapex has been gathering dust. That Erika costs as much as most of our lists of tools from Mafell. The pull saw concept is still foreign to me. I'll need to look closer at it sometime....maybe when I get rich ![;)](//storage.proboards.com/3639287/images/8Vyo_UvZchsYoXV6ow0w.gif) Garch will probably add his list in a few days when he is done trying to remember all of them that he owns.
|
|
|
Post by woodie on Nov 9, 2014 14:12:34 GMT -5
My first would have been the KSS80, but I had to wait for 120v version to be released in the US ![:)](//storage.proboards.com/3639287/images/lf01zHDDEHQDMk2Tvanb.gif) . At the time I was also waiting on Festool's Carvex launch. They kept putting the date off on this, so I decided to make the jump to the P1CC. Sooo glad I made that decision! After that it was the MT55 and a few accessories. Next on the wish list is the Erika 85. Still holding out hope that they'll release a 120v version of it.
|
|