|
Post by wrightwoodwork on Oct 14, 2015 14:11:06 GMT -5
I got these serious duty clamps from Piher. I got the maxipress F. First impression of them is top quality . The things I like about them so far is you can add a spike to aid pulling items, the threads on the handle are totally hidden so can't get full of dirt and the handle can be in line or can be turned 90 degrees to give some serious leverage Attachments:
|
|
|
Post by lincoln on Dec 6, 2015 5:24:22 GMT -5
Bought a Luban low angle jack plane, this week. These are made by the Quiangsheng Tool Company, in China. Don't let that put you off though - they are very well made, with a fantastic fit and finish. I took a chance on their block plane, after reading some excellent reviews, last year, so knew what to expect. The blade comes ground, but not honed, so a few swipes on my diamond plate and it was ready to go. Feels great in the hand, and has some real weight behind it. Produced beautiful thin shavings, with no tearout, in the hardwood board I tested it on. Comes with a 5 year warranty. Amazing value for money. Highly recommended.
|
|
mattuk
Junior Member
Posts: 79
|
Post by mattuk on Dec 6, 2015 15:28:15 GMT -5
I second quality from the Quiangsheng Tool Company. I also had the block plane last year following reading the favourable reviews. Going to have a look at Luban now. Thanks.
|
|
|
Post by Red on Dec 7, 2015 12:58:06 GMT -5
I'd be very interested in knowing how you put this tool to so much good work, J Alvis. We own the Starrett 439-18, but it reads as if a MUF training class is on order to get everything out of this [obviously] well-made tool.
|
|
|
Post by Knight Woodworks on Dec 7, 2015 17:06:37 GMT -5
What Red said. I've been eye balling the Starrett builders square for a long time. Never been able to convince myself that I'd use it enough to make the purchase worthwhile. What makes it a Great tool for you?
John
|
|
|
Post by Red on Dec 8, 2015 8:21:12 GMT -5
What Red said. I've been eye balling the Starrett builders square for a long time. Never been able to convince myself that I'd use it enough to make the purchase worthwhile. What makes it a Great tool for you? John Here's some FYI type stuff for you, John...After reading J Alvis' post, I emailed Starrett directly. They happen to be based in our (US) state, so I figured that we could always go there, if needed.
Here's what it boils down to:
- Part No. 03595-A ...... 24-inch blade for 439 Body .................................. $249.32 USD
- Part No. 439-18 ........ Builder's Combination Square w/ 18-inch blade ...... $479.00 USD
- Part No. 439-24 ........ Builder's Combination Square w/ 24-inch blade ...... $502.00 USD
What does this tell me? It tells me that the used market is the source for any of these items, and that a trip to Starrett won't be necessary.
|
|
|
Post by Knight Woodworks on Dec 9, 2015 12:21:00 GMT -5
I agree, used would be the way to go. I've seen pre-owned ones in good condition go for about half of list. If I knew for sure I'd use it, I'd get one.
FWIW I first became aware of the Starrett builders combination square in FWW no. 67, at that time (1991) the 24" version cost $195.55.
John
|
|
|
Post by Red on Dec 9, 2015 21:52:22 GMT -5
I agree, used would be the way to go. I've seen pre-owned ones in good condition go for about half of list. If I knew for sure I'd use it, I'd get one. FWIW I first became aware of the Starrett builders combination square in FWW no. 67, at that time (1991) the 24" version cost $195.55. John Wow, John! That's good information that tells a story all on its own.
Like me, you seem to be interested in fine measurement tools...Have you given the Woodpecker brand a look? We now own several of their measurement tools for wood workers and, quite frankly, it's pretty good stuff.
|
|
|
Post by Knight Woodworks on Dec 10, 2015 10:06:18 GMT -5
Like I said, if someone could show me how that square would improve my work I'd be all over it.
I do like nice tools. Some guys are into fancy pens, expensive watches and exotic cars, I prefer high quality tools.
I own six of the Woodpecker squares; the 6" - 26" & the 18" triangle. Of those I like 18" triangle and the 26" square the best, mostly because there's not many options in that size range. The choices are pretty much Woodpecker's or a framing square, a drafting triangle or build you own. They are all well made, though I find the blade too thick on the smaller sizes, especially on the 6" version which I mostly use to check jointed stock for square. Don't own any of the rules etc., what of theirs do you like?
If you like nice WWing tools check out Vesper Tools in Australia. I own two of his bevel squares, they're amazing.
John
|
|
|
Post by GhostFist on Dec 10, 2015 11:42:56 GMT -5
Don't get the Australians excited.
|
|
|
Post by lincoln on Dec 10, 2015 15:56:56 GMT -5
Don't get the Australians excited. We're always excited
|
|
|
Post by charley1968 on Dec 18, 2015 10:46:25 GMT -5
I gotta strike a blow for Veritas and Lie-Nielsen bench chisels. Being all alone this x-mas i decided i'd get meself a wee present: the 3/4' Veritas bench chisel and the 5/8 Lie-Nielsen. Boy, was i impressed: excellent heft for/on both chisels. The back or the blade was flat like in lichtspaltfrei.Both were sharp out of the box and i used them straight away on some pine, for doing dovetails. They really worked nicely. During my apprenticeship i used Kirschen chisels and i own a set of japanese 'economy ' chisels, made by Hattori: both brands do not compare to the Veritas/Lie-Nielsen. One caveat: the beveled sides on both chisels are sharp to the touch. No problem for professional wworkers, but potentially risk of injury for the week-ender.
|
|
|
Post by Knight Woodworks on Dec 18, 2015 11:43:03 GMT -5
Which do you prefer?
John
|
|
|
Post by charley1968 on Dec 18, 2015 11:56:12 GMT -5
Cant' really say: i like the Veritas more for it's looks and it's got better balance, but it might be that it is a broader chisel. The Lie-Nielsen has a nice blade geometry, it's feels somewhat stouter, a bit like a mortising chisel
|
|
|
Post by charley1968 on Dec 18, 2015 12:00:30 GMT -5
As for a buying guide: i'll mix and match. Veritas only sports 4 or 5 sizes, Lie-Nielsen some more. Btw. I' m metric but i don't consider that as a counter-argument against imperial chisels
|
|