|
|
Post by 7 on Oct 8, 2013 22:30:28 GMT -5
Funny- I was typing my stuff above when you made your post GhostFist. Notice my last line on the previous post. Your telepathic.
|
|
okami
New Member
Posts: 27 
|
Post by okami on Oct 8, 2013 23:06:42 GMT -5
In regards to the domino, I own one and while it's a great tool I feel the dd40 is more versatile especially when it comes to cabinets. The track with it allows for easy alignment and works off the 32mm system so it doubles for super fast shelf pins. While I'm still getting used to my domino I find it rather finicky. I'm really expecting my dd40 to be much more versatile. I'm keeping the domino as I think it will be great for more furniture type stuff but the dd40 has my money when it comes to cabinets. I think you're right about that, for cabinet work the dd40 looks like the better option, especially with the track. |
|
|
|
Post by stofke72 on Oct 9, 2013 7:36:57 GMT -5
In regards to the domino, I own one and while it's a great tool I feel the dd40 is more versatile especially when it comes to cabinets. The track with it allows for easy alignment and works off the 32mm system so it doubles for super fast shelf pins. While I'm still getting used to my domino I find it rather finicky. I'm really expecting my dd40 to be much more versatile. I'm keeping the domino as I think it will be great for more furniture type stuff but the dd40 has my money when it comes to cabinets. |
|
|
|
Post by stofke72 on Oct 9, 2013 7:41:31 GMT -5
Complicated question in my opinion. Sounds like at the moment it is about portability. Not knowing exactly what you will be doing presents a challenge for sure. I have always had the luxury of needing a tool for a specific upcoming job, then I purchase. That seems like the more sensible approach but I do have already some plans for cabinets at my own place so I believe I must concentrate on what I need for that and then buy additional stuff as neededMiter saw with stand that includes production stops Track saw or Table saw: Table is faster for repeat cuts, Track uses less space and is more accurate for mitering corners (for column wraps etc) I used to use a bosch table saw but moved to the small dewalt that only has 16" rip capacity. (all I seem to use outside of the shop) If space were were not an issue the big stationary table saws are nice. Router- I use the Bosch Colt a lot for light round over edge profiles. Good starter, good price. allows time for deciding which expensive router after experience. Domino or DD40- That is one I am still hoping to figure out. Glad to see I'm not the only one who is in doubt  |
|
|
|
Post by 7 on Oct 9, 2013 23:40:43 GMT -5
I have a cousin who has a nice production cabinet shop with all the large tools- in line boring, sliding table saw, time saver sanders, multiple shapers etc. Even though he has all the equipment he has a local guy that he now buys all his cabinet doors from. They are the same custom quality doors he can build but finds it faster & more economical to buy the doors.
If building your kitchen is your first job that your getting tools for you could look into the possibility of subbing the doors to someone with a specialized setup for just doors. That is the area where you will spend the most on tools. Just a thought.
|
|
|
|
Post by jalvis on Oct 10, 2013 0:08:06 GMT -5
Thats true about door shops. Although they might not sale to someone who isn't a business. It really depends on the shop.
If your looking for experience then you will need to make some doors.
|
|
|
|
Post by stofke72 on Oct 10, 2013 6:02:48 GMT -5
Thats true about door shops. Although they might not sale to someone who isn't a business. It really depends on the shop. If your looking for experience then you will need to make some doors. |
|
|
|
Post by stofke72 on Oct 19, 2013 6:40:17 GMT -5
Somehow the idea got into my head that I want the domino. I plan to make a rather heavy outdoor table and while I think the DD40 is an awesome machine I think connecting the wood with large domino's will be stronger somehow. I even found a connector that allows you to use the drill bits of the small domino with the large XL domino, so you can drill mortises from 4mm to 14m with only one domino. I guess it would be great to have both the DD40 and the domino but they are both pricey. www.senecawoodworking.com/products/rts-500-cutter-adapter-for-festool-df700 |
|
|
|
Post by fidelfs on Oct 19, 2013 14:15:53 GMT -5
I think the seneca adaptor might make the DF500 (small domino) collect dust in my workshop. The DF700 is better machine, more ergonomic, balanced, etc., but also more weight.
I will sell the small domino and use that money for something else. I think you won't get disappointed using the DF700 with the seneca adaptor.
|
|
|
|
Post by jalvis on Oct 19, 2013 14:53:28 GMT -5
Thats a great choice. It takes time to get everything one wants and needs. Maybe sometime down the road the DD40 can be added.....oh....but then theres the Lamello! It never ends.
|
|
|
|
Post by GhostFist on Oct 19, 2013 15:17:07 GMT -5
I still feel a dd40 would get more use
|
|
