Post by pykie on May 16, 2017 5:46:20 GMT -5
Hi guys, long time lurker, I'm currently thinking of moving over to the red beasts and need some advice as to my current setups and the best alternatives. I'm based in Australia, there's no Mafell dealers in Australia, so I will be importing straight from Germany so want to get this purchase right from experienced red users.
I'm a builder based in Melbourne, Aus. We do everything, from framing to trim, panels, plastering, the lot.
Now we don't deal in a ton of large beams etc that american framers tend to use, and we dont dwell too far out from 2 x 4 for most things other than lintels and LVLs on occasional pitched roofs and LOSP beams for pergola's etc.
I currently own a TS55 and a 18v HKC55.
The TS55 is probably one of my favorite tools in the trailer, im heavily invested in this system with a CT 26, 2 x 1.4m rails and a 3.0m rail as well as big variety of blades, so no real need to replace it with the Mafell alternative even though the dust extraction etc sounds amazing.
Now, the HKC55, I've been stuck running a job and bought this 6 months ago, so haven't had a huge chance to break this in until about 4 weeks ago. I certainly love the idea (which was invented by Mafell) and love its portability and simplicity especially on long cumberson pieces. I feel like the cut quality is a little hit and miss sometimes, especially in hardwood. The power is great for pine and softwoods, but is certainly lacking when you get anything 1"+ in hardwood. Struggles big time in some 32mm Blackbutt decking we have been doing on a job.
HAving used the HKC, I see the real versatility in using these systems, especially with a bit more power. I guess the question I'm asking, is, which is the best saw to combine with the current setup? The KSS300 sounds like a little ripper but it's cut capicity is certainly limited for framing purposes.
Now I dont own a 230mm saw and have been eyeing off the HK85 for quite a while. I almost bought it a month ago for a particular job.
Based on the above, what do people think would be a good addition. Is the KSS400 light enough ease of use for run of the mill stuff?
Because I'm seriously thinking of buying the KSS400 and the KSS80 as a pair to bridge that gap. Have people used a HK85 and a KSS80? Thoughts on the difference.
I've reas the KSS400 is a game changer for most carpenters, so I really would love some feedback.
Thoughts?
I'm a builder based in Melbourne, Aus. We do everything, from framing to trim, panels, plastering, the lot.
Now we don't deal in a ton of large beams etc that american framers tend to use, and we dont dwell too far out from 2 x 4 for most things other than lintels and LVLs on occasional pitched roofs and LOSP beams for pergola's etc.
I currently own a TS55 and a 18v HKC55.
The TS55 is probably one of my favorite tools in the trailer, im heavily invested in this system with a CT 26, 2 x 1.4m rails and a 3.0m rail as well as big variety of blades, so no real need to replace it with the Mafell alternative even though the dust extraction etc sounds amazing.
Now, the HKC55, I've been stuck running a job and bought this 6 months ago, so haven't had a huge chance to break this in until about 4 weeks ago. I certainly love the idea (which was invented by Mafell) and love its portability and simplicity especially on long cumberson pieces. I feel like the cut quality is a little hit and miss sometimes, especially in hardwood. The power is great for pine and softwoods, but is certainly lacking when you get anything 1"+ in hardwood. Struggles big time in some 32mm Blackbutt decking we have been doing on a job.
HAving used the HKC, I see the real versatility in using these systems, especially with a bit more power. I guess the question I'm asking, is, which is the best saw to combine with the current setup? The KSS300 sounds like a little ripper but it's cut capicity is certainly limited for framing purposes.
Now I dont own a 230mm saw and have been eyeing off the HK85 for quite a while. I almost bought it a month ago for a particular job.
Based on the above, what do people think would be a good addition. Is the KSS400 light enough ease of use for run of the mill stuff?
Because I'm seriously thinking of buying the KSS400 and the KSS80 as a pair to bridge that gap. Have people used a HK85 and a KSS80? Thoughts on the difference.
I've reas the KSS400 is a game changer for most carpenters, so I really would love some feedback.
Thoughts?