atlr
New Member
Posts: 16
|
Post by atlr on Sept 17, 2013 11:12:10 GMT -5
When using the parallel guide along the edge of a work piece, what are the minimum and maximum cut widths?
|
|
|
Post by wrightwoodwork on Sept 17, 2013 11:25:39 GMT -5
The minimum rip size is 75mm and the max is approx 240mm on the base of the jigsaw is 2 holes on the left and right of the blade which will give you a radius of 32mm then if you are using the parallel fence to cut circles between 50 - 210mm radius
|
|
atlr
New Member
Posts: 16
|
Post by atlr on Sept 17, 2013 11:57:24 GMT -5
Thank you, wrightwoodwork!
I found a video of sawing the 32mm radius hole using the base; fast forward to 2 minutes 51 seconds.
|
|
|
Post by GhostFist on Sept 17, 2013 13:34:17 GMT -5
nice one and welcome aboard BTW!
|
|