|
Post by lincoln on Apr 7, 2016 17:13:26 GMT -5
Hey guys. Has anyone scored and folded, to 90°, Alucobond or Dibond with a triple chip blade in their track saw? I know there's a router bit that is the correct profile, but I'd really like to use my MT55 on guide rails, as the pieces are about 3.2 metres long. We usually use 6x6mm powder coated aluminium square section on corners, but this shopfront requires a continuous look.
|
|
|
Post by holmz on Apr 8, 2016 2:50:24 GMT -5
Depending on when you start I could loan you the Bosch router holder to use on the rails... assuming that you have an LO50 or FT1010, Not sure if the larger FT routers ones fit on it, but there is a list of Bosch, Mafell and some deWalts.
|
|
|
Post by lincoln on Apr 8, 2016 4:04:20 GMT -5
Thanks for the offer, Holmz, but I only have the Festool 1400. I do have the small Bosch trimmer/router - do you know if that fits the plate?
|
|
|
Post by holmz on Apr 8, 2016 6:04:22 GMT -5
|
|
|
Post by GhostFist on Apr 8, 2016 11:09:59 GMT -5
I've been meaning to modify my track guide for the 1010 to work with Mafell tracks. Seems simple enough.
|
|