I am new to this forum and I thank you all for your interesting input, so far I was ready and learning, now I need your help !
I purchased a used Mafell LO 50 for a cheap price because the collet and nut were missing, I have found various references on Internet from German sellers, but they only sell the collet, not the nut.
Would you know which other make/model would share the same collet/nut combo ?
I guess Festool OF 1010 but I would like to be sure (Metabo OF 1229 seems the same as well, at least on a picture...).
I am based in France and I would like to avoid the trip to the closest Mafell shop (I called them and they do not wish to order on the phone, they want to see the machine and check the reference, I do not have much free time to pay them a visit).
Thank you very much for the link, I used it previously to find the Mafell references when trying to source the parts on Internet. Unfortunately the French "distributor" (as displayed on Mafell wbesite) no longer distributes them in real life. They are like most typical French pro distributors; open at 8AM, close at 12, open at 14, close at 17, from Monday to Friday; no way you can visit these guys if you have standard working hours, and no Showroom by the way, only a counter where you can ask what you need, and the price is never displayed on anything, I know they are not interested in individual/retail buyers for sure... I went there at 16h45 (they close at 17h00); when the salesman saw me he looked directly at his watch and he was not smiling at all !!
If anybody knows an online retailer, these are all the references I need; 076 441 (8mm collet for LO 50) 076 442 (nut for LO 50) 038 986 (chip extractor port for LO 50) 2000 42 (chip extractor for KSS400 24V, same I guess as normal KSS or KSP 55) 078 248 (red latch to secure systainers on a Starmix/Mafell/Metabo "clone" dust extractor)
If you know the part numbers any of the dealers can help you. If it was me I would just call another dealer who will send you the parts. Otherwise I would contact Mafell directly. Why would the dealer care if you ordered the wrong parts?
Guest: Can anyone mill a corian piece that will fit into the mafell rail for use with the mft3?
Aug 17, 2019 14:17:06 GMT -5
jimmyford: Can anyone mill a corian piece that will fit into the mafell rail for use with the mft3?
Aug 17, 2019 14:18:58 GMT -5
bengt: Oh please the ks60 is better in every way. 60 degree miter in both directions. Bevels past 45(essential in a saw that must cut on the flat) Bigger blade more capacity. The Metabo hpt has 57 degree miter max and 45 bevel max.
Sept 9, 2019 20:02:24 GMT -5
abdon: I stand corrected , the angle fence is only attaches with F -Tracks , what confused me was , that the Timberwolf site mentioned it will work with the NFU machine, yes it will work but only I guess when you use the Ftrack , with other tracks Like the KSS L.
Nov 28, 2020 22:52:01 GMT -5
glynnco: Did you order from GereedschapPro? I see them as in stock but I'm located in the US and am not sure if they ship here. I sent them an email asking about shipping but it was returned undeliverable...
Dec 10, 2020 7:37:40 GMT -5
jonathan: I've purchased a lot of stuff from our neighbours @ GereedschapPro.nl As far as I know they are one of the larger Mafell dealers in the EU. I can recommend them, they usually respond quickly.
Dec 11, 2020 13:58:36 GMT -5
NFU 50 Transportation?: Hi Guys, is there some Systainer for the NFU 50?
Dec 11, 2020 14:30:12 GMT -5
frezik24: Hello everyone
Dec 13, 2020 9:20:00 GMT -5
lasse: Thanks for the tip! I have own a mafell rail which is 160 cm and one that is 80 cm. Will it work just as well or will I need to buy rail that is 110 cm?
Mar 18, 2021 15:35:15 GMT -5