|
Post by Tom Gensmer on Feb 11, 2014 0:47:51 GMT -5
Great pics garch!! Very helpful.
|
|
|
Post by jalvis on Feb 11, 2014 12:32:08 GMT -5
I also had no idea about the insert.
Folding rules are essential for quick accurate work. I still can't understand why guys use rolled tapes all the time. With a folding rule you don't need to burn an inch and you can feel for a flush reading at zero.
|
|
|
Post by wrightwoodwork on Feb 11, 2014 13:53:01 GMT -5
Yeah it's a well laid out insert I store the parallel guide in its own spot the only thing is you need to move the the adjustable stop forward then all the blades have there own storage as well. Then there is plenty of room for other extras like some silicone spare to oil the track to make the saw slide more smoothly on the track. I also use a folding rule to me it's essential for accurate work especially if you intend to make things
|
|
|
Post by MrToolJunkie on Feb 22, 2014 12:35:42 GMT -5
I use a folding rule all the time -- I have a couple of them on hand.
|
|
|
Post by 7 on Mar 24, 2014 22:30:50 GMT -5
Looks like I missed the majority of this thread- The case looks very nice. I must admit on the folding rule conversation that for some reason I thought they were only used by brick masons. Shows what a knowledgeable carpenter I am  Garch- It seems every time you post a picture I ask you some random question about some object in your picture that isn't the main object the picture was taken for… what is the interesting looking work bench that the KSS400 box is sitting? and is there a purpose to the unique end cut other than looks? Also- a question for anyone- Does the KSS400 take the same blades as the MT55?
|
|
|
Post by garch on Mar 25, 2014 20:47:38 GMT -5
Looks like I missed the majority of this thread- The case looks very nice. I must admit on the folding rule conversation that for some reason I thought they were only used by brick masons. Shows what a knowledgeable carpenter I am  Garch- It seems every time you post a picture I ask you some random question about some object in your picture that isn't the main object the picture was taken for… what is the interesting looking work bench that the KSS400 box is sitting? and is there a purpose to the unique end cut other than looks? Also- a question for anyone- Does the KSS400 take the same blades as the MT55? I must have at least fifteen or so folding rules, from masons rules to carpenters rules in both imperial and metric, even my grandfathers rules from at least 65 or better years ago. Definitely recommended! I like the lufkin red end with slide rule; I believe lowes carries them One of the best ways to get accurate interior measurements. The bench is my take on a saw bench: laminated maple top with dog holes for traditional holdfasts, and the remainder of the bench is made from Doug fir, all constructed with hand cut mortise and tenon joinery. The end of the top is designed to allow for rip cutting with a handsaw, etc. Works well with the p1cc also! Allows for support while not cutting into your bench. Google Chris Schwarz saw bench to find out more. Blades: yes they are the same blades, I swap blades between the two often. You'll see the best nr. is the same in the Mafell catalog. However some blades listed under the mt55 are not listed under the KSS as they are probably not intended for use with the KSS, such as the 092474. A lot of info...hope this helps.
|
|
|
Post by 7 on Mar 25, 2014 21:49:22 GMT -5
Thanks for the reply. That makes a lot of sense on all subjects. Those table ends are a good idea for saw work. I was trying to come up with the reason why before I asked and couldn't think of anything. I guess it was a bit too obvious, I was thinking down the clamping vein. I posted in another section of me cutting into my work table with the p1cc on accident, oops.
|
|
|
Post by ivanhoe on Apr 4, 2014 11:48:17 GMT -5
I was using mine the other day (I use it every day) and some "carpenter" asked me what it was. I said "it's called a ruler" he didn't find it funny. Reminds me of 40+ years ago playing with my dad's folding rule. I was always intrigued by that tool. I use one as well in imperial. I have been debating getting one in metric. I think they are essential for taking measurements inside of or underneath cabinets or what-not.
|
|
alik
New Member
Posts: 8
|
Post by alik on Sept 16, 2014 21:47:00 GMT -5
Hi! I believe that Mafell MT55 saw blade is 162mm in height and kss 400 is 160mm . 
|
|
|
Post by thedude306 on Jan 6, 2015 15:54:28 GMT -5
No room for the tack, but the KSS400 fits on a bit of an angle in the Bosch/Sortimo L3 L-boxx. I am going to make and insert for it so that I can put blades under the saw similar to the MT55 insert. The rail will be transported separately. The roller guide fits in there as well 
|
|
|
Post by ohan on Jun 20, 2015 5:21:24 GMT -5
Of topic (sort of) but what the hell:
Anyone have any opinion on Wiha composite rules?
|
|
|
Post by holmz on Jun 20, 2015 7:45:16 GMT -5
Of topic (sort of) but what the hell: Anyone have any opinion on Wiha composite rules? Does it work on 110?
|
|
|
Post by ohan on Jun 20, 2015 8:36:50 GMT -5
LOL You need 25.4 of them to work in the US
|
|
|
Post by wrightwoodwork on Jun 20, 2015 9:19:31 GMT -5
That's brilliant the best tool ever
|
|
Mark
Junior Member

Posts: 72
|
Post by Mark on Nov 16, 2015 10:23:04 GMT -5
Hi, Im thinking of buying the KSS400 without the metal case, as id like to have it in a systainer, obviously without the crossrail. I'm guessing it will fit in a 3. But will a flexi rail fit in there too?
|
|