Looking; some I've found explicitly state they won't ship to the US, specifically. Not sure if that's our dear leader's new "trade winning", or COVID. Either way I'm now on the struggle bus to find a kit that's less than the cost of parts separately.
I’ve found that with some UK/Euro tool stores that if you email your request they decline as they would be putting in writing that they are flouting rules / territories. But when you call them and speak in person their attitude often changes.
Wonder if Bosch has something coming to replace it (?)
Evil corporate overlord version: Buy the parts separately cause we make more money.
Probable reason: Not enough buyers to keep making it now that most people who care have one. Except me. I want one. I just can't reason the cost and effort to part it together since it comes out to ~$100 or so more (even buying from EU).
Makes me ponder the Duo for pins, but what I really wanted was to be able to use it to line my router up off my rails. Even the MicroFence doesn't make a rail guide for the Bosch/Mafell rails and has no plans to do so after I contacted them last week.
Evil corporate overlord version: Buy the parts separately cause we make more Or we are in the middle of a global pandemic ,factory workers safety and all Probable reason: Not enough buyers to keep making it now that most people who care have one. Except me. I want one. I just can't reason the cost and effort to part it together since it comes out to ~$100 or so more (even buying from EU).
Makes me ponder the Duo for pins, but what I really wanted was to be able to use it to line my router up off my rails. Even the MicroFence doesn't make a rail guide for the Bosch/Mafell rails and has no plans to do so after I contacted
I had one on order, but it was just cancelled and now listed as "unavailable".
Does anyone know where I can get one?
axminster.co.uk has some of this and ship to the USA(inexpensively too by most accounts) the full kit is listed as out of stock but will be available in about a week,other bits and pieces are available in stock,hope this helps.
I was looking for this exact kit recently and spoke with some tool vendors here in the US and they said NAINA. I was, however, able to piece together the items I needed. From what I've been told, currently in the US Bosch is overwhelmed and orders are are taking about 2-3 weeks to fulfill.
Here are two sources of the tracks with the 32mm holes:
Note that while the FasToolNow prices are slightly higher, the order will drop ship directly from Bosch in Arkansas once fulfilled. ToolNut does not drop ship, so it will add about an extra week to the delivery time.
As far as the router plate and pin+stop goes, i got them from Amazon UK (shipping was combined for both items and came to 24 GBP):
I ordered the plate and pin on 6/24 and just got notice today (!) that they have shipped by DHL and should be getting them 7/7. I placed my order with FasToolNow on 6/26, spoke with Nate yesterday and the bosch agent indicated they will likely ship at the end of next week.
FWIW, I picked up the track connector plate (FSN VEL) from Tools Plus:
all: Thanks to all for supporting me. I want to learn or know. That's why I have come in here.
Jun 10, 2018 1:24:34 GMT -5
ineson85: Just been into AONE Tools (West Yorkshire) and they are having a Mafell sale. Loads of brand new, boxed tools going ridiculously cheap!
Jul 27, 2018 4:02:15 GMT -5
balgonie: Hikoki, please bring this beauty to Germany!!!!!!
Oct 26, 2018 1:04:14 GMT -5
jimh: I have been offline for a while. My email address is email@example.com. Thanks, Jim (surf123)
Jan 31, 2019 10:59:27 GMT -5
dam8: Shoot me an email if you want a pic of my removable Irving knife. I cut the base when I bought it so I can remove it when firstname.lastname@example.org plunge cut is needed Dave at milesRestorations dot com
Mar 23, 2019 19:22:40 GMT -5
rikflaxman: I need someone to pick out one best product from those on this list here.
Guest: Can anyone mill a corian piece that will fit into the mafell rail for use with the mft3?
Aug 17, 2019 14:17:06 GMT -5
jimmyford: Can anyone mill a corian piece that will fit into the mafell rail for use with the mft3?
Aug 17, 2019 14:18:58 GMT -5
bengt: Oh please the ks60 is better in every way. 60 degree miter in both directions. Bevels past 45(essential in a saw that must cut on the flat) Bigger blade more capacity. The Metabo hpt has 57 degree miter max and 45 bevel max.
Sept 9, 2019 20:02:24 GMT -5
alvychippy (guest): can not recover my registered email account atasas@gmx. do not remember the password, some assistance? or should I just register as new user?>
Dec 7, 2019 9:51:24 GMT -5
alvychippy: Guys, what is the name of aprox €9k machine for hand shaping of handrails?
Jan 8, 2020 16:16:15 GMT -5
stilts: So why is goldensun not banned and all those worthless threads not deleted?
Jan 11, 2020 14:31:42 GMT -5
alvychippy: It's the board hosts, that are having an idea, of somebody perhaps paying over the odds to acquire the board to administer it.... Obviously hopes are set high, Mafell isn't interested, so it carries on
Jan 12, 2020 9:30:06 GMT -5