|
Post by nhengineering on Oct 8, 2015 18:54:49 GMT -5
Hi.
I am new in this board and registered due to my soon arriving Mafell P1cc.
My question is simple: Can the P1cc be used with other brands of t-shank blades?
I have a lot of Festool blades and some Bosch blades.
If yes:
How does the P1cc deal with thicker blades when it comes to centering the blades?
Will a thicker blade be offsett sideways with a distance equal its difference in thickness?
-- Assa
|
|
|
Post by holmz on Oct 9, 2015 2:36:15 GMT -5
The hitachi 6tpi concrete board blade works well. The massive Bosch 150-mm blade cuts the thick beams well. I used some Bosch metal blad to cut some titanium a couple of weeks ago. Been saving the Mafell ones, but I assume they also fit
|
|
heiko
Junior Member
Posts: 80
|
Post by heiko on Oct 9, 2015 3:25:04 GMT -5
Hello, you get the correctly center with the "double" Cunex blade all others are not centered.
|
|
|
Post by holmz on Oct 9, 2015 3:44:12 GMT -5
But they all index on one side or the other... So I assume that if one cuts n the track the right way all the blades are all against the guide strip??
|
|
|
Post by wrightwoodwork on Oct 9, 2015 4:17:27 GMT -5
The cunex blade lines up with center mark on the anti splinter guards. All the rest line up on right hand side of the mark on the splinter guard I think. Basically on the waste side of the line. As long as the blade has a t shank it fits
|
|
|
Post by nhengineering on Oct 9, 2015 16:53:42 GMT -5
Ok, thanks for your replies. This sounds good!
-- Assa
|
|