As the subject describes it: The dimensions for the rail extrusion if you need it for jigs. Units are millimeters. Values in parenthesis are for reference. I cannot guarantee absolute accuracy for these measurements nor can I assume that the tolerances on my rails are the same as other rails. Some details like the anti splinter strip and the groove it sits in are not represented/simplified.
Last Edit: Oct 25, 2016 16:01:03 GMT -5 by reflector
Hi, Does anybody know whether the Bessey GTR16S6H and/or Festool 491594 ratcheting clamps fit the Mafell F guide rail? Thanks.
As a clarification, the answer is "No", but I'm learning to really lean on my local machinist to make custom tools and fixtures. If you have an application where you want/need ratcheting clamps, I suspect a good machine shop could mill the Festool clamp down to fit the Mafell track.
abdon: I stand corrected , the angle fence is only attaches with F -Tracks , what confused me was , that the Timberwolf site mentioned it will work with the NFU machine, yes it will work but only I guess when you use the Ftrack , with other tracks Like the KSS L.
Nov 28, 2020 22:52:01 GMT -5
glynnco: Did you order from GereedschapPro? I see them as in stock but I'm located in the US and am not sure if they ship here. I sent them an email asking about shipping but it was returned undeliverable...
Dec 10, 2020 7:37:40 GMT -5
jonathan: I've purchased a lot of stuff from our neighbours @ GereedschapPro.nl As far as I know they are one of the larger Mafell dealers in the EU. I can recommend them, they usually respond quickly.
Dec 11, 2020 13:58:36 GMT -5
NFU 50 Transportation?: Hi Guys, is there some Systainer for the NFU 50?
Dec 11, 2020 14:30:12 GMT -5
frezik24: Hello everyone
Dec 13, 2020 9:20:00 GMT -5
lasse: Thanks for the tip! I have own a mafell rail which is 160 cm and one that is 80 cm. Will it work just as well or will I need to buy rail that is 110 cm?
Mar 18, 2021 15:35:15 GMT -5