|
Post by holmz on Sept 22, 2015 0:51:25 GMT -5
I got stuck into some metal with the p1cc.
1.6-mm (1/16") titanium sheet and 1/2" x 1.6-mm tubing. I had the speed down at 1 with 1-2 on the pendulum action. It generally went through OK with a Bosch metal blade with lots of teeth.
Then some filing and soon some welding.
|
|
|
Post by GhostFist on Sept 22, 2015 7:07:14 GMT -5
If you can measure it and cut it it belongs on the forum
|
|
|
Post by holmz on Sept 22, 2015 7:57:16 GMT -5
I had to take to it with a grinder  to make the two parts equal length.
|
|