|
|
Post by wrightwoodwork on Apr 28, 2015 13:35:12 GMT -5
I'm currently building a couple of kitchen units for a friend plus a narrow wall unit. Here is some pics of the work done so far. I have most of the parts already cut and the holes with the dd40 done now is a case of assembling them together. Today I started putting the sides together. Taking a bit longer which I'm not to worried about gives us something to do |
|
|
|
Post by mick on Apr 28, 2015 14:24:51 GMT -5
Can't keep a good man down
|
|
|
|
Post by wrightwoodwork on Apr 29, 2015 14:27:11 GMT -5
Some progress pics of the cabinet . Apart from being a little short on space at the moment as the kitchen units from the house are also sitting their taking up room. The other thing is to build up a collection of clamps. Once the units are cleared I plan to build a work bench and also build cupboards for tools and materials. Plus cladding the outside of the shed. Comes down to when I have the time and money to to do |
|
|
|
Post by mick on Apr 29, 2015 16:16:11 GMT -5
|
|
|
|
Post by wrightwoodwork on Apr 29, 2015 17:06:44 GMT -5
Some not bad deals there I'd also being looking at Piher clamps as well
|
|
|
|
Post by wrightwoodwork on Apr 29, 2015 17:39:58 GMT -5
Them units look like they will last a life time what are you going to Finnish them with Read more: mafell-users-forum.freeforums.net/thread/467/kitchen-cabinet?page=1#ixzz3YjrEWNMO Can't remember what I'm going to use to finish them. Spoke to the boy I get finishing from. Think it was some kind of polyurethane finish. Also being using the fixing I got a few weeks back. Working reasonably well. In each pair of holes I put one of the quick set dowels then in the other hole I fill with knapp pu+ glue and knock in the plastic dowels. The glue goes into a split in the dowel and also slightly expands and set rock hard. I also put a bead of glue along the edge of the board. So the boards are fixed all the way along the edge. Not just relying on the mechanical fixings. Feel solid and built to last. |
|
|
|
Post by wrightwoodwork on Apr 30, 2015 7:41:45 GMT -5
One unit built minus the doors Attachments:
|
|
|
|
Post by wrightwoodwork on Apr 30, 2015 12:59:34 GMT -5
The next unit on its way to completion Attachments:
|
|
|
|
Post by wrightwoodwork on May 4, 2015 16:54:26 GMT -5
Here is a couple of pics Attachments:
|
|
|
|
Post by wrightwoodwork on May 4, 2015 17:44:43 GMT -5
Here is a vid of doing the doors. Nothing fancy just something simple to give a bit of character
|
|
|
|
Post by mick on May 5, 2015 7:12:25 GMT -5
Nice video your set up is really nice would love it
|
|
|
|
Post by wrightwoodwork on May 10, 2015 13:58:05 GMT -5
Here is a pic of the wall unit. The plan is to put frosted toughened glass and the doors to open up the way when fitted Attachments:
|
|
jacko
Junior Member
Posts: 95 
|
Post by jacko on May 15, 2015 21:39:28 GMT -5
Great work, we need others to post their projects on here to get more discussion going to the use of good tools.  |
|
|
|
Post by GhostFist on May 17, 2015 10:59:34 GMT -5
I'm certainly guilty of not ever posting anything in build, but that's due to the nature of my work. I would be leaking behind the scenes stuff that would essentially end my career. I pull out the phone to line up a shot and the movie gods descend on me like flaming devil vultures. I hate it because I have so much I would love to show
|
|
|
|
Post by wrightwoodwork on May 17, 2015 11:52:17 GMT -5
Just curious are you or do they ever take snap shots of screens so it can be redone at a later date. They do at times seem a bit over protective at times
|
|
