|
Post by jalvis on Jun 26, 2013 12:52:20 GMT -5
Rip Cutting 4/4 x 10ft lumber using TENRYU 12 tooth blade. TENRYU makes this blade for the Festool TS55 but is compatible with Mafell MT 55. Blade is only $25.00 so great deal.
I have over 800 BD FT to rip cut and this blade is making the job fast and the saw motor working less.
|
|
|
Post by GhostFist on Jun 26, 2013 17:26:10 GMT -5
awesome! will look into this one. I can see how my parallel jig maybe tight in your shop space, on another note....
|
|
|
Post by jalvis on Jun 27, 2013 8:41:49 GMT -5
Things are tight all around right now. Theres 830 Board Feet stacked(half is 16 foot pieces) and 20 sheets of ply for the same project waiting to be used.....al this in addition to everything else. Cant wait to get more room one of these days! Being a woodworker requires one to adapt every day.......just taking it one step at a time.
|
|
|
Post by GhostFist on Jun 27, 2013 9:00:36 GMT -5
Going off topic, I've always said the most important characteristic of a woodworker is his ability to adapt and invent. A full shop is hopefully a busy shop as well.
|
|
|
Post by wrightwoodwork on Jun 27, 2013 12:00:10 GMT -5
There's never enough space in any shop. More space means more places to put things
|
|
|
Post by GhostFist on Jun 27, 2013 12:38:58 GMT -5
Agreed
|
|
|
Post by jalvis on Jun 28, 2013 10:15:57 GMT -5
You really cant be a woodworker that does installations without adapting and inventing. Every job has difficulties that demand one to think differently and use whats available to get the job done.
As for more shop space.....I have a long way to go but planning for the future. Personally I think the best business model is one that grows based on "anticipated" projections not "demand." We all have a goal in mind.....Mine involves a loading dock and fork lift.
|
|
|
Post by jalvis on Jun 28, 2013 10:18:04 GMT -5
All this talk has me thinking a 'shop' category would be useful on the Forum?
|
|
|
Post by jonathan on Jun 28, 2013 10:44:45 GMT -5
That went pretty smooth by the looks of it. How's the cut quality?
|
|
|
Post by jalvis on Jun 28, 2013 23:23:07 GMT -5
The quality is really quite good. Not as good as a higher toothed blade but it really depends on the application. Most of the time Ripped edges end up on the jointer anyway.
|
|