My dealer highly recommends premium non-ethanol. Two strokes require better fuel but in my experience are low maintenance otherwise. I even have a small two stroke motorcycle from the 60's. Tough motors.
Post by toomanytoys on Oct 28, 2014 7:19:16 GMT -5
With the Stihl I also would recommend the premium fuel and the Ultra, silver bottle oil. The higher octane will keep the motor running cooler per Stihl.
With all the farm equipment we have the blended fuel has been a real, documented problem with the fuel delivery systems. I have been rebuilding carbs and replacing fuel lines and priming buttons in the last 5-10 years more then I have during the previous 20. This is with either putting in stabilizer for the winter or draining and letting them run dry.
Post by hawkyjoiner on Nov 24, 2014 18:14:43 GMT -5
Have u guys seen the new Makita twin 18v chainsaw due out Dec a had my first shot of a chainsaw couple months age I was doin a decking and my brickie friend was laughing at me struggling in the mud with a handsaw so gave me shot of his new stilh chainsaw it was brilliant a cut all my posts and joists and even sum deck boards and buzzed thru in no time so I was thinking the twin 18v Makita would do for this kind of task as a have lot of the batteries anyway a have been impressed with other makita stuff and just wondered wot us thought
If your building a deck you will have power anyway for a chop saw and circular saw. Therefore I wouldn't get battery operated unless its a big profit gain in efficiency. My experience with cordless is they are eventually disposed of since the batteries go bad and the manufacturer moves on with new products. Often the support goes with it. If you get an electric unit you will have long term value plus no battery replacements. Stihl and Makita make good electric units.
If you don't commonly have power get one of those light weight Honda generators.
abdon: I stand corrected , the angle fence is only attaches with F -Tracks , what confused me was , that the Timberwolf site mentioned it will work with the NFU machine, yes it will work but only I guess when you use the Ftrack , with other tracks Like the KSS L.
Nov 28, 2020 22:52:01 GMT -5
glynnco: Did you order from GereedschapPro? I see them as in stock but I'm located in the US and am not sure if they ship here. I sent them an email asking about shipping but it was returned undeliverable...
Dec 10, 2020 7:37:40 GMT -5
jonathan: I've purchased a lot of stuff from our neighbours @ GereedschapPro.nl As far as I know they are one of the larger Mafell dealers in the EU. I can recommend them, they usually respond quickly.
Dec 11, 2020 13:58:36 GMT -5
NFU 50 Transportation?: Hi Guys, is there some Systainer for the NFU 50?
Dec 11, 2020 14:30:12 GMT -5
frezik24: Hello everyone
Dec 13, 2020 9:20:00 GMT -5
lasse: Thanks for the tip! I have own a mafell rail which is 160 cm and one that is 80 cm. Will it work just as well or will I need to buy rail that is 110 cm?
Mar 18, 2021 15:35:15 GMT -5