Post by wrightwoodwork on May 10, 2013 7:20:07 GMT -5
I would say the kss400 is a workhorse of a saw which is the one to go for if your work is mostly 1st fix joinery framing. Its not perfect for everything like finishings where the kss300 is the best choice. It can do but it is a bit too bulky, also if you are mostly doing kitchens and cutting melamine faced materials the Mt55 is the one to get as you have the scoring function. It could I think do with a more powerful motor like u get with the Mt55 , but as long as timber isn't soaking and decent blade on for ripping its fine. Also the other thing I use it for is cutting 18“ conti board using the kss rail if they did a Mt55 version that attached to the rails with the scoring funtion would be good for doing your melamine shelving. The cross cut capicity relates to the depth of cut I've not many anyone who has tried the kss system who doesn't like it once you've used it you will not want to go back
Post by wrightwoodwork on May 10, 2013 10:56:34 GMT -5
The length of cut given in specs relates to the blade being full depth and cutting maximum depth. So at full depth of 40mm on the kss300 will cut 300 mm but if u are cutting 6mm ply you will gain a longer cut. On the kss I regularly cut 18“ conti boards but have to have the saw full depth to gain the extra
abdon: I stand corrected , the angle fence is only attaches with F -Tracks , what confused me was , that the Timberwolf site mentioned it will work with the NFU machine, yes it will work but only I guess when you use the Ftrack , with other tracks Like the KSS L.
Nov 28, 2020 22:52:01 GMT -5
glynnco: Did you order from GereedschapPro? I see them as in stock but I'm located in the US and am not sure if they ship here. I sent them an email asking about shipping but it was returned undeliverable...
Dec 10, 2020 7:37:40 GMT -5
jonathan: I've purchased a lot of stuff from our neighbours @ GereedschapPro.nl As far as I know they are one of the larger Mafell dealers in the EU. I can recommend them, they usually respond quickly.
Dec 11, 2020 13:58:36 GMT -5
NFU 50 Transportation?: Hi Guys, is there some Systainer for the NFU 50?
Dec 11, 2020 14:30:12 GMT -5
frezik24: Hello everyone
Dec 13, 2020 9:20:00 GMT -5
lasse: Thanks for the tip! I have own a mafell rail which is 160 cm and one that is 80 cm. Will it work just as well or will I need to buy rail that is 110 cm?
Mar 18, 2021 15:35:15 GMT -5