|
Post by Tom Gensmer on Feb 17, 2014 22:15:03 GMT -5
So, when my last order arrived it turned out that FedEx damaged my F80 track. Timberwolf immediately sent out a replacement free of charge, so great customer service there!
With the bent F80 track, rather than patting it be a total loss, I elected to turn it into a F50 track (50cm), cutting it down 1" at a time. So, I now have roughly a dozen or so 1" sections of Mafell track, my thought was that if anybody needed to send a cross section of track to a machinist or get it scanned I can provide a section of track.
That being said, I only have a dozen, so I don't want to burn through them right away, but if someone has a design that is ready for production or otherwise wants a section, please let me know and I'll see if I can spare a piece.
Just an FYI. Hope everybody is well!
|
|
|
Post by 7 on Feb 18, 2014 1:01:03 GMT -5
That 50 cm track will come in handy. I have a cut off piece that is 16" long and I find myself using it a lot. FedEx/ UPS will not ship the 10' track so Timberwolf has to cut a chunk off to be within the max shipping requirement.
|
|