|
|
Post by lincoln on Dec 8, 2020 15:00:31 GMT -5
|
|
ramin
New Member
Posts: 31
|
Post by ramin on Dec 9, 2020 14:06:30 GMT -5
I ordered mine already. will report back here once I've tested it out.
|
|
|
|
Post by aas on Dec 10, 2020 7:22:11 GMT -5
I can understand a 1m rail, what's the point of a 1.5m rail - i.e. seriously longer than the saw? - I've never used T tracks on a table saw.
|
|
|
|
Post by glynnco on Dec 10, 2020 8:01:45 GMT -5
Did you order from GereedschapPro? I see them as in stock but I'm located in the US and am not sure if they ship here. I sent them an email asking about shipping but it was returned undeliverable...
These rails are exactly what I've been hoping for. Like several of you here, I've mounted my Incra LS and have been extremely happy with the result. However, the lack of a useable top side t slot on the Mafell rails makes it difficult to clamp down an Incra fence easily. These rails solve that problem. I'm not quite sure about the inclusion of a miter slot although I suppose you could find use for that on the left side of the table for various other options. I just don't have much need for that.
|
|
ramin
New Member
Posts: 31
|
Post by ramin on Dec 10, 2020 8:59:50 GMT -5
Did you order from GereedschapPro? I see them as in stock but I'm located in the US and am not sure if they ship here. I sent them an email asking about shipping but it was returned undeliverable... These rails are exactly what I've been hoping for. Like several of you here, I've mounted my Incra LS and have been extremely happy with the result. However, the lack of a useable top side t slot on the Mafell rails makes it difficult to clamp down an Incra fence easily. These rails solve that problem. I'm not quite sure about the inclusion of a miter slot although I suppose you could find use for that on the left side of the table for various other options. I just don't have much need for that. yes, pretty sure they ship worldwide. I order from them all the time. info@gereedschappro.nl should work normally. |
|
|
|
Post by glynnco on Dec 10, 2020 9:46:41 GMT -5
Thanks! I just sent another email and this time it went through fine.
With regards to rails longer than 1m, I almost always work with various sheet goods and fairly frequently need to rip at about 30" or. I tend to break sheets up on the horses with my MT55 and then bring them to final size length wise on the Erika. Ends then get squared up on an MFT I made. Having the extra width capability on the Erika would really make the difference for me.
|
|
|
|
Post by charel09 on Dec 10, 2020 11:47:52 GMT -5
I ordered mine already. will report back here once I've tested it out. ordered mine too today I would like to fit a featherboard but the miter will be more than 10" (26cm) away from the sawblade. Any idea how to resolve this ? |
|
|
|
Post by theartificer on Dec 24, 2020 16:29:39 GMT -5
Did you order from GereedschapPro? I see them as in stock but I'm located in the US and am not sure if they ship here. I sent them an email asking about shipping but it was returned undeliverable... These rails are exactly what I've been hoping for. Like several of you here, I've mounted my Incra LS and have been extremely happy with the result. However, the lack of a useable top side t slot on the Mafell rails makes it difficult to clamp down an Incra fence easily. These rails solve that problem. I'm not quite sure about the inclusion of a miter slot although I suppose you could find use for that on the left side of the table for various other options. I just don't have much need for that. yes, pretty sure they ship worldwide. I order from them all the time. info@gereedschappro.nl should work normally. I've been speaking to them about shipping one to Australia, they only ship to Europe generally by the look of it, they were pretty reluctant to look into the shipping at first but they're looking into it now apparently. I'll let ya know if I have any luck. |
|
|
|
Post by aas on Dec 25, 2020 7:51:43 GMT -5
they only ship to Europe generally by the look of it, they were pretty reluctant to look into the shipping at first but they're looking into it now I do understand why, even within Europe - 50% of my parcels arrive with the packaging damaged, maybe 10% with goods damaged too. I'm lucky to live an area that package theft is minimal, if it happens, it's not from the doorstep, it's before it's even delivered. I wouldn't want to insure delivery around the world.
This is what you get when you make it too expensive to run physical stores / provide customer service, so what the hell, we'll order online and the only thing that counts is the price... and we trust the delivery of these expensive goods to minimum wage workers... just watching them rummage around the van for a lost parcel like they're looking for the red sweet at the bottom of the packet!.. not too surprising the end result!
When I've got tools to sell, I won't even ship in France anymore - local pick up only, payment cash only!
Good luck, I hope you manage to get shipping sorted.
|
|
curious
New Member
EVA 150E, UVA 115E, P1cc, KSS80ec, MT55 18B bl, MKS 130ec, Erika 85, DDF40
Posts: 4
|
Post by curious on Jan 2, 2021 5:21:00 GMT -5
Can I use it with a sliding table?
|
|
|
|
Post by charel09 on Jan 2, 2021 6:37:20 GMT -5
Can I use it with a sliding table? yes, you can use it with anything that has a miter bar but don't forget that the combination track is more than 10¨away from the blade |
|
|
|
Post by fredgab on Jan 20, 2021 14:36:48 GMT -5
Hi,
super interested in this!
Good sign to see mods/upgrades by third party manufacturers for this great saw.
What would be the best application/combination for t-tracks like this (not super used to US cabinets saw but can see why it could be useful)
I know some finger joint jig that could be adapted to them but dunno how accurate that would be with t-track not super close from the edge ?
Could also see an upgrade for the sliding carriage with a small panel under, that would act as a small panel saw too.
Or also an accurate ripping guide over 25cm with some sort of measuring on the user side..(dro :-)"
what are your needs/ideas for this ?
Cheers
fred
|
|
|
|
Post by aas on Jan 21, 2021 0:53:24 GMT -5
I think 3 would be ideal - one front and back to replace the Mafell extension rails which aren't super strong, and one at the side... but this would be very spendy!
|
|
|
|
Post by fredgab on Jan 24, 2021 12:20:11 GMT -5
I think 3 would be ideal - one front and back to replace the Mafell extension rails which aren't super strong, and one at the side... but this would be very spendy! Indeed! Might pull the trigger for that at some point, quite expensive but might be worth it. Maybe I start with one 1500... Do you know how sleds are usually fixed to the table, just dropped on top of the slot? |
|
|
|
Post by aas on Jan 25, 2021 10:52:24 GMT -5
You'll need a T-track adaptor
|
|
