|
Post by hecon5 on Nov 29, 2020 11:07:54 GMT -5
Thanks! Appreciate that!
|
|
|
Post by kraftt on Nov 29, 2020 12:16:38 GMT -5
...this is what I imagine Hell must be like.
|
|
|
Post by alvychippy on Nov 29, 2020 12:32:07 GMT -5
...this is what I imagine Hell must be like. Dowler, pffff, you haven't seen my biscuit jointer yet 😂 . . . . 
|
|
|
Post by kraftt on Nov 30, 2020 12:55:31 GMT -5
Everyone should have these bits, very handy.
|
|
|
Post by hecon5 on Nov 30, 2020 13:55:12 GMT -5
I have a dislike of routers; and avoid using them (1 part of absolute dust chaos, and 1 part general distrust of their not causing explosions), so while probably foolish, I try to avoid using them where possible.
That said, I have seen some newer dust attachments that look to be pretty svelte.
|
|
|
Post by aas on Dec 1, 2020 1:30:45 GMT -5
I have a dislike of routers; and avoid using them (1 part of absolute dust chaos, and 1 part general distrust of their not causing explosions), so while probably foolish, I try to avoid using them where possible. That said, I have seen some newer dust attachments that look to be pretty svelte. The router is one of the most versatile workshop tools - dust can be a problem, it's not always possible to collect it, the OF2200 is pretty good in this regard.
I try to avoid routing anything explosive... I must admit I'm a bit lost on the explosion thing...
I've only got 8 or 9, but I would like to have a decent collection! (Yes I use them all!)
|
|
|
Post by hecon5 on Dec 1, 2020 4:52:05 GMT -5
It's not a rational fear, at all. Comes from a bit spinning at 10kRPM or more, and separating into me. I realize a good bit and router won't, but it's always in my head. I also realize a saw could do as much or more damage, but for some reason, that's my fear.
|
|
|
Post by alvychippy on Dec 1, 2020 14:55:42 GMT -5
hecon5 you haven't spindler head coming apart on you.... Even though I worked with since and use routers often, that blade holder bit embedded in breeze block, post flying across workshop, punching through two layers of plasterboard will not be forgotten in a hurry 🙉
|
|
iban
Full Member
 
Posts: 111
|
Post by iban on Dec 18, 2020 17:20:12 GMT -5
I have a dislike of routers; and avoid using them (1 part of absolute dust chaos, and 1 part general distrust of their not causing explosions), so while probably foolish, I try to avoid using them where possible. That said, I have seen some newer dust attachments that look to be pretty svelte. I´ve just bought a dewalt 622 after recommendations in some spanish and german forums. They all said that this router has an amazing dust collection and it´s true!
|
|
|
Post by huntsgemein on Dec 18, 2020 18:07:36 GMT -5
Well done! I consider this model to be the best machine of its type ever made. It is easily the most versatile machine, having nice compact dimensions & easily the smoothest plunge action available. Extraction is indeed superior, too.
Its predecessor, the 621, is similar but it has a couple of significant differences across the world. Euro models use the smaller Elu 96/DW615 1/4", 6 & 8 mm collet system incompatible with the Aus/NZ/North American Collet system that's shared with the monster DW626 machines. The DW622 uses the latter system.
About the only limitation of the DW622 is in its ability (in common with any mid-size router) for heavy duty spindle work when inverted in a router table. Still, at 1400w it's by no means even approaching "underpowered", & is indeed significantly more powerful than Elu/DeWalt's other compact plunge routers. It also inherits Elu/DeWalt's comprehensive range of OEM & aftermarket accessories. The most extensive & comprehensive ever made for routers. Unfortunately, most have already been discontinued, but are still readily available second-hand. Guide bushes are available (second hand mostly) individually & in kits from about 10.8mm to 40mm. At least 10 different sizes are available.
In summary, collets & guide bushes are cross-compatible with all DW626 models. Collets are compatible with Aus/NZ & North American DW621 & 620 models too, but not Euro models. Guide bushes are common globally across Elu 97 & 97E, DeWalt DW620, 621, 622 & 626 models. Guide rods are the "small" router standard (8mm) with "standard" spacing common to all smaller DW, Elu & hundreds of other similar routers worldwide. The UK, home of Trend routing Co. easily has the greatest availability of accessories on the second-hand market.
Elu (& briefly DW) some time ago made a lovely little Accessory kit for their "small" range that often comes up on Flea-Bay UK in particular. It has, among other things, a super-fine precision height adjuster, a mini-spindle moulder (micro router table) which is ideal for small & short-run precision moulding making (dolls houses, antique resto etc.), a copy follower, pressure pads, a large right-angled fence/jig for flushing furniture edge lipping etc. & other precision tasks that are all but impossible with "modern" routers.
Whilst the larger size of the DW 620/621/622s makes it a slightly ungainly fit in the small spindle table (it was originally designed for the tiny, gem-like Elu MOF96) it still fits (just), the comprehensive utility of this & the rest of the accessories makes it a worthwhile, if not essential accessory purchase in my opinion.
I personally consider the small Elu/DeWalt range to still be the very best hand-held small routers available. Despite having some 50 odd years to catch up, no other manufacturer to date has even approached the utility, ease of use, ergonomic superiority & extensive accessory library of these timeless Elu designs.
|
|