iban
Full Member
Posts: 111
|
Post by iban on Sept 21, 2020 15:05:36 GMT -5
I have tried today the Deros for the first time in a proyect and I placed all the screws and bolts as the manual say it is the best way when using a protecting pad.
I noticed much more vibartion with the pad saver than without and I was wonder if there is any configuration of the counterweights that can minimize vibration.
|
|
|
|
Post by holmz on Sept 22, 2020 5:00:51 GMT -5
No... just take it off if the flex of the saver makes it jerk, or charge the RPM (orbits/minute) to see if that has an effect.
it is not balance... it is sticking and releasing, due to the flex in the pad saver...
|
|
iban
Full Member
Posts: 111
|
Post by iban on Sept 22, 2020 8:59:51 GMT -5
Reducing speed 1 point helped a lot.
Balancing with screws and bolts makes any difference or does not worth to play with it?
|
|
|
|
Post by holmz on Sept 22, 2020 16:40:58 GMT -5
Reducing speed 1 point helped a lot. Balancing with screws and bolts makes any difference or does not worth to play with it? If it does not bounce and Jerk without the pad saver, then I think that the balance would not be a causal mechanism for the jerking? |
|
