Post by wrightwoodwork on Nov 16, 2013 15:19:59 GMT -5
Yeah window was too big. Someone I know had got a load of double glazing units and was giving them away for free, so from the glass sizes I made the opening to suit the glass sizes and must have miss calculated. So for 2 windows I had to only buy the wood which cost £120 and my own time. Then I manged to get the timber preservative for free as well. So they have had 2 coats of base and will get another 2 coats of stains I used the doweler for the joints instead of the comb joints a proper workshop set up would be great and the specialist cutter blocks would be great
Holy shit! This is crazy alright, no dust collection at all
In all seriousness though, I like his setup and template idea. Reminds me of Matthias Wandel's pantorouter. I would at least smooth out that piece of lumber a fair bit first though, for obvious reasons.
Last Edit: Feb 17, 2014 16:40:40 GMT -5 by jonathan
jimmyford: Can anyone mill a corian piece that will fit into the mafell rail for use with the mft3?
Aug 17, 2019 14:18:58 GMT -5
bengt: Oh please the ks60 is better in every way. 60 degree miter in both directions. Bevels past 45(essential in a saw that must cut on the flat) Bigger blade more capacity. The Metabo hpt has 57 degree miter max and 45 bevel max.
Sept 9, 2019 20:02:24 GMT -5
abdon: I stand corrected , the angle fence is only attaches with F -Tracks , what confused me was , that the Timberwolf site mentioned it will work with the NFU machine, yes it will work but only I guess when you use the Ftrack , with other tracks Like the KSS L.
Nov 28, 2020 22:52:01 GMT -5
glynnco: Did you order from GereedschapPro? I see them as in stock but I'm located in the US and am not sure if they ship here. I sent them an email asking about shipping but it was returned undeliverable...
Dec 10, 2020 7:37:40 GMT -5
jonathan: I've purchased a lot of stuff from our neighbours @ GereedschapPro.nl As far as I know they are one of the larger Mafell dealers in the EU. I can recommend them, they usually respond quickly.
Dec 11, 2020 13:58:36 GMT -5
NFU 50 Transportation?: Hi Guys, is there some Systainer for the NFU 50?
Dec 11, 2020 14:30:12 GMT -5
frezik24: Hello everyone
Dec 13, 2020 9:20:00 GMT -5
lasse: Thanks for the tip! I have own a mafell rail which is 160 cm and one that is 80 cm. Will it work just as well or will I need to buy rail that is 110 cm?
Mar 18, 2021 15:35:15 GMT -5