|
Post by aas on Apr 19, 2019 1:07:05 GMT -5
Erika 85EC speed controller not working - 1 year old, not a huge amount of use - just runs at flat out.
I'm a bit surprised. Anyone else had this issue?
|
|
|
Post by remdds on Apr 21, 2019 10:30:33 GMT -5
I saw this post when you first put it out there and noticed no responses. I guess that means it is a pretty rare occurrence.
It made me wonder how often you guys adjust your speed. I have never used mine at less than full speed.
|
|
|
Post by aas on Apr 21, 2019 13:22:05 GMT -5
I got a new CMT blade for doing 45's on some solid surface - cut it well flat out, but I had intended to turn it down a tad. Having a look at the sticker on the saw, it only really needs turning down for aluminium.
Either it's a rare occurrence, on everyone is flat out all the time!
|
|
|
Post by Knight Woodworks on Apr 21, 2019 17:36:58 GMT -5
The only thing I've cut is wood and wood products, never dialed it down. I'll try a lower speed and see what happens.
John
|
|
|
Post by Knight Woodworks on Apr 23, 2019 9:59:46 GMT -5
The speed controller on my 70 works fine. Sorry yours doesn't.
John
|
|
|
Post by Tom Gensmer on Apr 23, 2019 21:59:56 GMT -5
Likewise, the speed controller on my 120v Erika 70 works fine. I slow it down for cutting aluminum handrail and 80/20 extrusions.
|
|
|
Post by aas on Apr 28, 2019 14:52:39 GMT -5
Too busy to be without it for now, I'll have to get this looked at at some point.
|
|