|
Post by MrToolJunkie on Jan 25, 2015 16:01:22 GMT -5
This fixed the pin seating issue. All I did was take the pin and chuck it up in a drill and put a slight bevel on it with a file. Works 100% Untitled by thedude306, on Flickr The kit also works GREAT for dados. Here's the big router and the results. This is actually more valuable to me then the shelf pins. This was always a PITA to do on the table saw for me. This was very SLICK! Untitled by thedude306, on Flickr Untitled by thedude306, on Flickr Untitled by thedude306, on Flickr Untitled by thedude306, on Flickr This is great!! Love the stop-rule!!
|
|
jacko
Junior Member
Posts: 95
|
Post by jacko on May 21, 2015 15:47:02 GMT -5
Guys,
I just spoke with Jeff and David at Timberwolf about getting the Bosch quick release clamps. At first they said that they didn't carryt them but, they asked if I had a model number and I think if there were sufficient customers for them in North America they might be able to get them.
Anybody know of the Bosch Model number for the quick release clamps?
How many people are actually interested in buying them?
Jack
|
|
|
Post by lincoln on May 21, 2015 16:04:08 GMT -5
FSN KZW Professional Part # 1600A001F8
|
|
|
Post by toomanytoys on May 21, 2015 16:09:53 GMT -5
Bosch FSN KZW clamps.
I'm debating just getting Bosch's OFA 32 kit which includes them directly from England as I did with a longer 2100 rail.
|
|
jacko
Junior Member
Posts: 95
|
Post by jacko on May 21, 2015 16:30:27 GMT -5
How much do these "FSN KZW Professional Part # 1600A001F8" clamps cost in the Euro zone? If they can get them in North America for anywhere near that cost I'll be buying them.
Jack
|
|
|
Post by holmz on May 21, 2015 16:46:09 GMT -5
I asked and the Bosch-Au said not available in Australia. So I am open for a pair if someone is getting stuff. (The shipment tp me from the US is $13 in a flat rate bag.)
|
|
|
Post by holmz on May 21, 2015 16:59:03 GMT -5
I asked and the Bosch-Au said not available in Australia. So I am open for a pair if someone is getting stuff. (The shipment tp me from the US is $13 in a flat rate bag.)
|
|
|
Post by lincoln on May 21, 2015 17:36:52 GMT -5
If Timberwolf will ship them to Aus, which I'm sure they would, I'm in for a pair.
|
|
|
Post by toomanytoys on May 21, 2015 18:02:06 GMT -5
About $100 with shipping.
|
|
jacko
Junior Member
Posts: 95
|
Post by jacko on May 21, 2015 18:08:34 GMT -5
$100 including shipping would be great consider what I payed for the Mafell clamp set. I'll report back when I hear back from Timberwolf and see how much they want if they do bring them in to the USA.
Jack
|
|
|
Post by lincoln on May 21, 2015 18:59:03 GMT -5
Have sent an email to elektrowerkzeug-shop.net, will see if they can get the clamps. They ship worldwide, so could be an option. Will report back when I hear back.
|
|
|
Post by holmz on May 21, 2015 19:28:39 GMT -5
Have sent an email to elektrowerkzeug-shop.net, will see if they can get the clamps. They ship worldwide, so could be an option. Will report back when I hear back. I may ask Tobias about the Fan club t-shirts - unless you do first?
|
|
jacko
Junior Member
Posts: 95
|
Post by jacko on May 21, 2015 19:30:51 GMT -5
Have sent an email to elektrowerkzeug-shop.net, will see if they can get the clamps. They ship worldwide, so could be an option. Will report back when I hear back. I may ask Tobias about the Fan club t-shirts - unless you do first? Sounds good guys, I'm in for the clamps and the tee shirt (XL) that is ;-)
|
|
|
Post by lincoln on May 21, 2015 20:40:41 GMT -5
Have sent an email to elektrowerkzeug-shop.net, will see if they can get the clamps. They ship worldwide, so could be an option. Will report back when I hear back. I may ask Tobias about the Fan club t-shirts - unless you do first? I'll ask when he gets back to me, holmz. I also have to place an order with him mid next week, so could get some sent down with it - I'm sure they could stuff a few in the systainer/maximax!
|
|
|
Post by lincoln on May 22, 2015 0:17:06 GMT -5
Ok, €49(Euro's) for the pair of clamps. Tobias apologized for not being able to give a better price, they're not a very big Bosch dealer.
|
|