andey
New Member
Posts: 19
|
Post by andey on Jul 22, 2019 22:41:56 GMT -5
hi.
is there a guide on where i can open and replace the guide rail slop wheels?
I accidentally over tightened the wheels and now its free rolling. i imported the set from germany and it would be costly to return it for repair there (singapore to de). for now, i shimmed it against the rails as a temp fix and now i decided to take it one step further to go the diy method of repair after getting the parts from tobias.
|
|
|
Post by aas on Jul 23, 2019 3:07:05 GMT -5
I've had a quick look on mine, I think you need to undo the torx screw that holds the friction bar in place underneath, there will either be another screw for the knob or it will pry off, and the black block will slide out the side. I'm guessing it's possible to find parts diagram breakdown on the internet somewhere, that should give you an idea by seeing what screws or clips there are.
|
|
|
Post by kraftt on Jul 23, 2019 18:32:08 GMT -5
aas is on the right track, start with removing the allen.
After that it's easy, but there's a trick: Rotate the knob while gently pushing from underneath and it will align to slip right out without effort. Then the main body/sleeve slides right out. That's it.
I remember looking for a place to hide some led batteries one day thinking I could find some hollow space in there and had to open it up.
|
|