dos
New Member
Posts: 5
|
Post by dos on Dec 10, 2018 8:03:56 GMT -5
Hello Everyone, my name is Dominik, i'm from Poland
I recently bought an used Erika 60 that requires some small repairs and few parts. Among others it came without riving knife and I'd like to make one myself.
I'd like to ask the saw owners if anyone would have the will, possibility and time, and be so kind to make an outline of the riving knife and the mounting plate, make a scan copy and send me per email?
I'd be very greatful for such sacrifice
Kind regards.
D.
|
|
|
Post by Tom Gensmer on Dec 10, 2018 23:14:10 GMT -5
Hi dos, welcome to the forum! It might save you some effort to reach out to Mafell directly to see if you can buy the riving knife directly from them? It might save you a lot of time and effort. I have an Erika 70, but am not sure if it uses the same riving knife....
|
|
|
Post by henrun on Dec 11, 2018 2:07:22 GMT -5
I can see if I can remove mine and make a template out of it but I am sure it would not be so expensive to order a spare directly from Mafell.
The riving knife is small enough for me to scan directly on my scanner/printer so I could probably do this during the weekend but this week is kind of busy so you'll have to wait until the end of the week.
|
|
dos
New Member
Posts: 5
|
Post by dos on Dec 11, 2018 2:46:46 GMT -5
Hi, I know I can order this part in Mafell. I'll have to order some other thing so I'd like to avoid this extra cost, and the riving knife is easy to make when having a template. henrun - thanks a lot. The part is easy to remove. You'll need to loosen 2 screws. I'll also need a template for the small plate that is holding the knife to the saw. It's number 25 on the diagram: tiny.pl/thv3dRegards D.
|
|
|
Post by henrun on Jan 7, 2019 15:21:02 GMT -5
Sorry for not getting back to you - the saw is "stuck" on a job site and I haven't taken off the part to bring it home to make a copy on the scanner. The project is still going for a few weeks before I get to bring it back home and start taking things apart. If you can't wait I suggest you order the spare part through a dealership/shop that orders from Mafell and let them bring it in with another order so they don't charge you for shipping!
|
|
dos
New Member
Posts: 5
|
Post by dos on Mar 20, 2019 7:24:41 GMT -5
Hi Henrun, my request is still valid
|
|
|
Post by henrun on Mar 21, 2019 14:45:20 GMT -5
Dos! Sorry, I did forget about this and the saw is actually still on the same site - there has been some changes and we need it to trim down trim (...) so I still haven't had the opportunity to remove the riving knife... We are nearing the end of the Studio build though I am on a different site at the moment with something that had to be squeezed in. I will hopefully have the saw back in about a week or two! Maybe I can remove the riving knife on site and trace it on to an A4 paper and scan or even send it to you. / Henrik
|
|
|
Post by henrun on Mar 25, 2019 13:51:53 GMT -5
Hey Dominik, I will get the Erika back home tomorrow evening, I will remove the riving knife and scan it for you so you can print out a template. PM me with your email, if you already did that before - PM me again. / Henrik
|
|
|
Post by henrun on Mar 27, 2019 13:12:20 GMT -5
Dominik, I need your email. I can't upload pdf or correct size image via PM. PM me with your email and I will send it off tonight.
I have scanned the parts.
/ Henrik
|
|
dos
New Member
Posts: 5
|
Post by dos on Apr 9, 2019 1:09:58 GMT -5
Wish you health, money and love Henrik
|
|